Tanalised / Pressure Treated Garden Timber

Tanalised / Pressure Treated Garden Timber

Earlier this week we received a review on one of our products, part of it was:

“The first thing I noticed was how badly it had been pressure treated with greensplatters on a number of pieces”

I personally really hate a bad review, this was one but unfounded, we try our hardest to provide a top quality product with a top class service and will review everything that is said to improve where we can.Sometimes though it just comes down to understanding a product that you are buying and the expectations that match it.

This review has prompted me to write this quick post as from this statement it is clear that customers are not realising what tanalised timber actually is: I shall explain a little about it so people can gain more understanding of what you are buying and that there are no faults at all nor “badly” carried out.

Tanalisation / Pressure treatment are one of the same, it is the identical process and is carried out normally on pine timber for outside use as a rot protection:


The two terms used are describing exactly the same timber treatment:

  • Tanalised is actually a trademark, as is ‘Tanalith E’ which you will see sometimes.  This brand has been around since the 1940’s.
  • Pressure treatment is the process carried out using ‘Tanalith E’ or similar.


The treatment process is carried out by placing the timber in a big tank.  The door is shut and a vacuum is created inside it.  Then the pressure treatment fluid is allowed to enter and is forced in the wood under the pressure.  It penetrates to a depth of a few millimeters.

Tanalised Garden


The main ingredient is copper with other chemicals added.  Copper is excellent for protection against rot and insects.  The other chemicals (Biocides) protect against other rot that the copper can’t such as ‘brown rot fungi’.  These substances are not harmful at all and can be used around animals and children.  Fish may be sensitive to it.

Rot Proofing of Timber 

It does exactly what it says and protects the timber from rot really well, internally they say about 60 years and externally about 30 years against any form of rot.  It’s pretty good stuff!

Please note after watching the process, it is in a huge tank under a vacuum, it cannot be at fault or ‘Badly’ done.

Limitations of tanalisation / Pressure Treatment

So now we understand how the process works, as the video explains, the timber will be:

  • An initial light green colour.
  • Weathers to a light honey brown.
  • Eventually to a natural silver grey.

This change of colour is not any indication of loss of preservative protection. Subsequent decorative finishes can be added to create the look you desire, you will see many examples of this across our website and catalogue.

We supply fixings that will have a comparable life to the timber for many of our products but please note if timber is cut, notched, sawn etc then a comparable treatment will need to be applied to carry on protecting the timber.

Perceived Faults in Pressure Treated / Tanalised Timber

Occasionally, a customer will perceive faults in the process without a full understand of it such as the above review. Some of these perceived faults are:

Formation of salts: 

With impregnated wood it may seem as if salts are formed on the surface of wood. It is actually resin that colours yellow/green due to the impregnation. These stains will vanish in time. This is an example and shows the ‘Splatters’ complained about in the review:

Tanalised Timber

One of our fence panels displaying the formation of salts and “Splatters”

You can see from this picture green portions on the fence panel. This cannot be helped and is part of the pressure treatment process. You may see this on your new pergola, planter or gazebo, please expect this, it is completely normal.

Fungi and blue moulds:

Wood impregnated by boiler pressure induction will become very humid while being processed. As a result, the wood can be affected by mildew and fungi, especially during the warm seasons. These visual imperfections of the product will vanish or can otherwise easily be removed by hand.  Fungi do not affect the quality or strength of the wood.  Since wood can swell and shrink as a natural product, the dimensions listed in the catalogue and product pages can show small deviations.

This is an example from one of our show buildings. You can also see a small split in the timber which is also completely normal.

Pressure Treated garden

Blue mold and the formation of salt crystals.

All of these blooms, stains, salts etc can either be washed off or left, they will eventually go and is a standard feature of any timber that has been pressure treated. Our customer with the bad review went on to say:

“The pergola is up now and after fixing it and rubbing down the green splashes”

This was extremely worrying and I have advised him since, but, please do not “rub down” the ‘Splashes’! Doing so will remove the protection. Removal of resin bubbles is fine with a sharp knife but do not rub down the surface.

As we have learnt these are not a splash, these are the inherent properties of timber and the tanalisation process and are the cause of the copper ingredient reacting with the moisture and sap within the timber itself.

Here’s another example of a perceived fault:

Garden Timber

Light bleaching after the tanalisation process.

I have added green lines on his product to highlight it more for you. You will notice there are some lighter lines. These lines will have been caused after the pressure treatment process and during storage. Light affects timber, it cannot be helped.

During storage certain parts may be covered due to packaging, positioning etc. Other parts are exposed to light. Light will start to react with the timber turning it first to brown and then to a silvery colour. Again this cannot be helped and should be expected.

After a few weeks all of the new structure will reach the same colour due to light exposure.

Of course you can add your own preferred colour to any tanalised timber. Tanalisation / Pressure treatment is of course only a rot proofing treatment is is NOT a decorative finish.